MOTO FORMULA

 

 A SYNTHETIC OIL, ORGANIC ESTER BASED, FOR TWO-STROKE HIGH PERFORMANCE COMPETITION MOTOR-CYCLES.

一種合成油, 有機酯基礎油.適用高性能的二行程競賽機車

 

INTRODUCTION AND APPLICATIONS

 

MOTO FORMULA  is composed of special synthetic based materials which have an extraordinary lubrication capability and optimum resistance to thermal degeneration and by suitably balanced additives which guarantee very high performance levels under the most severe of operating conditions.

MOTO FORMULA是由特別原料所組合成的. 有驚人的潤滑能力. 其良好的中性配方,有效降低温度.因而在嚴苛的環境下行駛,仍可保持其高性能的水準

MOTO FORMULA is perfectly mixable with all types of petrol, even unleaded. Its viscosity requires hand mixing with petrol even though  in some cases it can be used with automatic mixing devices.

MOTO FOMULA適用於各式的燃料油.甚至於無鉛汽油.也可使用在需要與燃料油混合的設備

 

MOTO FORMULA has been specially formulated for air or water cooled two-stroke highly stressed competition engines.

MOTO FORMULA有特殊配方,適用於汽門及水門的二行程高壓競賽引擎

PROPERTIES AND PERFORMANCE

 

From the particular nature and quality of its components, MOTO FORMULA can ensure the following:

特殊合成配方品質.,MOTO FORMULA有以下的特性

·        exceptional engine lubrication between the pistons and cylinders as well as in the crank casing.

保持引擎內刮環及汽缸的卓越的引擎潤滑性能

·        very high engine efficiency which helps keep the engine clean and thereby avoiding build up of heavy deposits and scaling between the piston rings and within the exhaust ports.

其高清淨配方,能保持在刮環與內排氣零件之間表面乾淨及避免產生沈澱物,

·        exceptional cleaning of the spark-plug and silencer.

保持火星塞及消音器的乾淨

·        very low smoke emission and reduced pollution

降低污染廢氣的排放

 

TYPICAL CHARACTERISTICS

 

CHARACTERISTICS

 

MOTO FORMULA

 

Density at 15°C

Kg/l

                     0.959

Viscosity  at 40°C

cSt

                      133

Viscosity  at 100°C

cSt

                       19

Viscosity Index

 

                       156

Flash Point

°C

                       262

Pour Point

°C

                       -20

 

The characteristics and high performance of all ERG products are the result of

advanced formulation and process technology.

 

Storage and safety

 

Store preferably in a closed area. Should it be necessary to store in the open, keep all containers in a horizontal position or cover them to avoid any infiltration of water.  Do not store in temperatures above 60°C, in direct sunlight or in areas subject to frost.

 

文章標籤
全站熱搜
創作者介紹
創作者 s06150617 的頭像
s06150617

義大利ERG機油台灣的官方部落格

s06150617 發表在 痞客邦 留言(0) 人氣(203)